Makita 9565cr: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Makita 9565CR Information

The Makita 9565CR is a 1400-watt angle grinder with a 125mm (5") disc. It is designed for professional use and features a number of safety and performance-enhancing technologies.

Introduction

The Makita 9565CR is a powerful and versatile angle grinder that is ideal for a wide range of applications, including metal cutting, grinding, and polishing. It is equipped with a 1400-watt motor that provides plenty of power for demanding tasks, and it features a number of features that help to ensure operator safety and comfort.

Image

Full specifications

Feature	Specification
Motor power	1400 watts
Disc diameter	125mm (5")
No-load speed	11,000 rpm
Spindle thread	M14
Weight	2.2kg
Dimensions	299 x 139 x 103mm

Features

• Super Joint System (SJS) - The SJS is a mechanical clutch system that helps to prevent motor and gear damage by allowing the drive shaft to slip if the disc is suddenly stopped. This can help to prevent kickback and other accidents.
• Anti-restart function - The anti-restart function prevents the grinder from accidentally starting up after it has been turned off. This can help to prevent accidents if the grinder is bumped or dropped.
• Tool-less quick guard adjustment - The guard on the grinder can be adjusted quickly and easily without the need for tools. This makes it easy to change the guard for different applications.
• Labyrinth construction - The motor and bearings in the grinder are sealed with a labyrinth construction that helps to keep dust and debris out. This helps to extend the life of the grinder.
• Constant speed control - The grinder features constant speed control that helps to maintain the same speed under load. This can help to prevent the disc from slowing down and stalling, which can be dangerous.
• Soft start - The grinder has a soft start feature that helps to prevent the disc from suddenly spinning up when the grinder is turned on. This can help to prevent accidents.
• Dust collecting wheel guard - An optional dust collecting wheel guard is available for the grinder. This can help to reduce the amount of dust that is created when the grinder is used.

What's in the box

The Makita 9565CR comes with the following:

• Angle grinder
• Protection guard
• Side handle
• Wrench
• Instruction manual

The Makita 9565CR is a powerful and versatile angle grinder that is ideal for a wide range of professional applications. It is equipped with a number of safety and performance-enhancing technologies, making it a safe and reliable tool to use.

Makita 9565CR Compare with Similar Item

a comparison table of the Makita 9565CR and some similar items:

Feature	Makita 9565CR	Makita GA5030	Makita GA4530
Power	1400 W	1050 W	950 W
Disc diameter	125 mm	125 mm	125 mm
Speed	11,000 rpm	10,000 rpm	9,500 rpm
Weight	2.2 kg	2.1 kg	2.0 kg
Features	SJS (Super Joint System) clutch, anti-restart function, soft start, tool-less guard adjustment	SJS clutch, anti-restart function, soft start	SJS clutch, anti-restart function
Price	$120	$90	$80

As you can see, the Makita 9565CR is the most powerful of the three grinders, but it is also the heaviest and most expensive. The Makita GA5030 is a good option if you are looking for a less powerful grinder that is still lightweight and affordable. The Makita GA4530 is the most affordable option, but it is also the least powerful.

Ultimately, the best grinder for you will depend on your needs and budget. If you need a powerful grinder for heavy-duty tasks, then the Makita 9565CR is a good choice. If you are looking for a lighter and more affordable grinder for occasional use, then the Makita GA5030 or GA4530 are good options.

Here are some additional details about the features of each grinder:

• SJS (Super Joint System) clutch: This clutch helps to prevent damage to the motor and gears by allowing the drive shaft to slip if the wheel is forced to stop.
• Anti-restart function: This function prevents the grinder from starting up accidentally after it has been turned off.
• Soft start: This feature helps to smooth out the startup of the grinder, reducing the risk of kickback.
• Tool-less guard adjustment: This feature allows you to adjust the guard without the need for tools, making it quick and easy to change discs.

I hope this comparison table is helpful!

Makita 9565CR Pros/Cons and My Thought

The Makita 9565CR is a 7-inch, 10 amp angle grinder that is known for its power, durability, and ease of use. It is a popular choice for professional and DIY users alike.

Pros:

• Powerful motor: The Makita 9565CR has a powerful 10 amp motor that can handle even the toughest jobs. It can cut through metal, concrete, and masonry with ease.
• Durable construction: The Makita 9565CR is built to last. The housing is made of high-quality plastics and metals, and the grinder is designed to withstand vibration and impact.
• Ergonomic design: The Makita 9565CR is designed to be comfortable to use for extended periods of time. The handle is well-contoured and the grinder has a rubber overmold that provides a secure grip.
• Dust protection: The Makita 9565CR has a dust protection system that helps to keep the motor and bearings clean. This can help to extend the lifespan of the grinder.
• Variable speed trigger: The Makita 9565CR has a variable speed trigger that allows you to control the speed of the grinder. This is helpful for different applications, such as cutting or grinding.

Cons:

• Weight: The Makita 9565CR is a bit on the heavy side, weighing in at 7.2 pounds. This can make it difficult to use for extended periods of time.
• Noise: The Makita 9565CR is a noisy grinder. If you are sensitive to noise, you may want to consider a different model.
• Vibration: The Makita 9565CR can vibrate quite a bit, especially at high speeds. This can be uncomfortable for some users.

User reviews:

Overall, user reviews of the Makita 9565CR are positive. Many users praise the grinder's power, durability, and ease of use. Some users do mention the weight and noise as being drawbacks, but overall, the Makita 9565CR is a well-liked grinder.

My thoughts:

The Makita 9565CR is a great angle grinder for professional and DIY users alike. It is powerful, durable, and easy to use. The only drawbacks are the weight and noise, but these are minor concerns for most users. If you are looking for a high-quality angle grinder, the Makita 9565CR is a great option.

Here are some additional thoughts on the Makita 9565CR:

• The variable speed trigger is a great feature that allows you to control the speed of the grinder for different applications.
• The dust protection system is a helpful addition that can help to extend the lifespan of the grinder.
• The ergonomic design makes the Makita 9565CR comfortable to use for extended periods of time.
• The weight and noise are the only real drawbacks of the Makita 9565CR.

Overall, I think the Makita 9565CR is a great angle grinder. It is powerful, durable, and easy to use. The variable speed trigger and dust protection system are also nice features. If you are looking for a high-quality angle grinder, I would definitely recommend the Makita 9565CR.

Makita 9565CR Where To Buy

Here are some places where you can buy the Makita 9565CR angle grinder and spare parts:

• Makita Direct: Makita's official website sells the 9565CR angle grinder for $119.99. They also sell a variety of spare parts for the grinder, including brushes, washers, and nuts.
• Walmart: Walmart sells the 9565CR angle grinder for $124.88. They also carry a limited selection of spare parts, such as brushes and washers.
• Amazon: Amazon sells the 9565CR angle grinder for $119.99. They have a wider selection of spare parts than Walmart, including brushes, washers, nuts, and gears.
• Best Buy: Best Buy sells the 9565CR angle grinder for $129.99. They also carry a limited selection of spare parts, such as brushes and washers.
• Lowes: Lowes sells the 9565CR angle grinder for $129.99. They also carry a limited selection of spare parts, such as brushes and washers.
• eBay: eBay is a good place to find used or refurbished Makita 9565CR angle grinders and spare parts. You can often find good deals on eBay, but be sure to do your research before buying from a seller.

I hope this helps!

Makita 9565CR Problems and Solutions

some common issues and problems with the Makita 9565CR and their solutions, as provided by experts:

• The tool won't turn on. This is usually caused by a problem with the switch. To fix this, you can try cleaning the switch contacts with a contact cleaner. If that doesn't work, you may need to replace the switch.
• The tool is not getting enough power. This can be caused by a problem with the battery, the charger, or the power cord. To test the battery, try using it in another tool. If it works in another tool, then the battery is good and the problem is with the charger or power cord. To test the charger, connect it to a working power outlet and try charging the battery. If the battery does not charge, then the charger is bad. To test the power cord, connect it to a working power outlet and try using the tool. If the tool does not work, then the power cord is bad.
• The tool is smoking. This is a serious problem and should not be ignored. If your Makita 9565CR is smoking, immediately unplug it and stop using it. Do not attempt to use the tool again until you have determined the cause of the smoking and have taken steps to fix it. The most likely cause of smoking is a problem with the motor. If the motor is damaged, it will need to be replaced.
• The tool is making a strange noise. This could be a sign of a problem with the motor or other components. If you hear a strange noise coming from your Makita 9565CR, stop using it immediately and have it inspected by a qualified technician.

Here are some additional tips for preventing problems with your Makita 9565CR:

• Use the correct type and size of battery. Using the wrong type or size of battery can damage the tool.
• Do not overload the tool. Make sure that the tool is not being used to do more work than it is designed for.
• Keep the tool clean and free of debris. Debris can build up inside the tool and cause problems.
• Store the tool in a cool, dry place. Extreme temperatures and humidity can damage the tool.
• Have the tool serviced regularly by a qualified technician. This will help to prevent problems and extend the life of the tool.

I hope this helps!

Makita 9565CR Manual

Makita 9565CR Angle Grinder Manual

Safety Information

• Read all safety warnings and instructions before using this tool.
• Keep this manual for future reference.
• This tool is intended for grinding, sanding, and cutting of metal and stone materials without the use of water.
• Do not use this tool for any other purpose.
• Use only accessories that are recommended by Makita for use with this tool.
• Always wear safety glasses with side shields when using this tool.
• Also wear a dust mask, hard hat, work gloves, and long pants to protect yourself from dust, flying particles, and accidental contact with the rotating disc.
• Make sure the work area is well-lit and that there are no obstacles that could interfere with your work.
• Do not use this tool in wet or damp conditions.
• Keep children and bystanders away from the work area.
• Do not leave the tool running unattended.
• Turn off the tool and disconnect it from the power supply before making any adjustments or changing accessories.
• Let the tool cool down before storing it.

Before Use

• Check the tool for any damage before using it.
• Make sure the guard is in place and adjusted properly.
• Tighten all fasteners before using the tool.
• Use the correct size and type of disc for the job.
• Do not use a disc that is cracked, chipped, or damaged in any way.
• Do not use a disc that is larger than the guard opening.
• Do not use a disc that is made of a material that is not compatible with the type of work you are doing.
• Do not use this tool to cut or grind electrical wires.

Troubleshooting

• If the tool does not start, check the power cord and make sure it is plugged in properly.
• If the tool starts but does not run smoothly, check the brushes and make sure they are not worn out.
• If the tool overheats, turn it off and let it cool down before using it again.
• If the tool vibrates excessively, check the mounting bolts and make sure they are tight.
• If the tool is damaged, do not use it. Contact a Makita service center for repair.

Maintenance

• Clean the tool regularly with a dry cloth.
• Do not use water or other liquid cleaners to clean the tool.
• Inspect the tool regularly for signs of wear or damage.
• Replace worn or damaged parts as needed.
• Store the tool in a dry, cool place.

Warranty

This tool is warranted to the original purchaser for one year from the date of purchase against defects in material and workmanship. If this tool fails within one year from the date of purchase, Makita will repair or replace it, free of charge.

Contact Information

For more information about this tool or to find a Makita service center near you, please contact:

Makita USA, Inc.

14900 Topanga Canyon Blvd.

Chatsworth, CA 91311

Phone: 1-800-4-MAKITA (1-800-462-5482)

Website: www.makitatools.com

Additional Information

• The Makita 9565CR angle grinder is a powerful tool that can be used for a variety of tasks. However, it is important to use it safely and properly to avoid accidents.
• Always read the safety warnings and instructions before using this tool.
• Make sure you are wearing the appropriate safety gear, such as safety glasses, dust mask, hard hat, work gloves, and long pants.
• Keep the work area clean and well-lit.
• Do not leave the tool running unattended.
• Turn off the tool and disconnect it from the power supply before making any adjustments or changing accessories.
• Let the tool cool down before storing it.

By following these safety precautions, you can help ensure your safety and the safety of others when using the Makita 9565CR angle grinder.